Honeycomb picosecond is a new laser medical aesthetics project that started quietly last year. Because the machine is expensive and requires skilled doctors to operate, very few institutions were introduced at the beginning. Initially, it was only available in Shanghai. There were only a few of them in Beijing at the beginning. Even this year, with the gradual promotion of the honeycomb picosecond effect and word-of-mouth, coupled with the star effect, professional institutions in Beijing began to make honeycomb picoseconds. The initial instruments were only two. Three units, but actually this project is already relatively mature in Taiwan.
After the news that Fan Bingbing went to Taiwan to do picosecond surgery, there were only two picosecond instruments in Beijing. They were produced by the well-known instrument manufacturer Sanoxiu Company of the United States and were certified by authoritative organizations: US FDA and China CFDA certification 
I often do beauty care. The organization seized the opportunity to introduce this machine and hired professional doctors from Taiwan to operate it. It also became one of the earliest organizations in Beijing to promote the honeycomb picosecond project. I'm very familiar with the boss. Through her introduction, and the exciting price for my first trial, I made an appointment half a month ago when the Taiwanese doctor came over. Today I came here to experience the honeycomb skin of the Internet celebrity industry. What is the charm and effect of Miao? Because I did some homework before coming here and saw actual cases. It is indeed very attractive in terms of effects.
What is Honeycomb Picosecond? : It claims to be able to eliminate all visible pigments, focusing on solving pigmentation problems. It targets all types of spots, acne marks, tattoos, facial yellowing and dullness, redness, and stratum corneum. Thin, dark circles, acne marks and pits. Treatment experience: no pain, no side effects, no rebound effect, no sensitization, no darkening, short treatment time, fast recovery cycle. Many people worry about whether it can be used on skin with thin stratum corneum, redness, and sensitive skin. Try hive picosecond .
The doctor gave a definite answer. This device can also improve this type of skin and will not affect the normal state of the skin at all. It stimulates collagen production and repairs skin cells from within, giving it healthier skin quality. This machine is delicate. It takes forty minutes to start and run, and it needs to stay in an air-conditioned and constant temperature environment. During this period, the doctor also introduced some features of the machine. So the question is, this machine is expensive, and the price of one time is expensive. Why is it so expensive? Is it worth it? This instrument is produced by Sanoxiu Company of the United States and has been certified by authoritative organizations: US FDA and China CFDA certification. The photomechanical shock wave effect is used to replace the thermal effect, crushing the pigment into the smallest particles, and minimizing the side effects of the photothermal effect, which can achieve the purpose of solving almost all types of pigment spots. At the same time, the "Focus lens honeycomb instant lens" protects the epidermis from wounds and the base layer of the epidermis from being destroyed, and at the same time activates the tissue repair mechanism to simultaneously improve the problems of acne scars, pores, and wrinkles.
One of the two lenses of the instrument is used to scan the entire face, even out the skin tone, and solve overall problems. The latter is a 755 honeycomb array lens that concentrates and focuses the energy. The laser light provides an efficient shock wave to the tissue, shattering the epidermal melanin at the same time. , stimulates the growth of collagen in the dermis, increases skin elasticity and thickness, refines pores, and makes skin crystal clear and radiant! This honeycomb lens is also a top priority. If you want to make a fuss about the price, many cheap ones will probably only give you one type to scan the whole face, while the honeycomb lens in key areas may not be able to provide you with the key details. After using it, if you don’t understand it, you may foolishly think that you have completed a real picosecond. . . The price of honeycomb picoseconds is so high that it may be ten times more expensive than ordinary lasers. So it must be expensive for a reason. Let me show you a few sets of comparisons and you will understand how good it is~!
1. Efficient and non-returning. In terms of the principle of freckle removal, Picosecond is similar to C6, C8, etc. that are common on the market, and both belong to the category of laser freckle removal. In fact, it is just like (think of light as a hammer, think of color as a stone, use different hammers for different stones, the hammer smashes the stone, and then the wind blows away the broken bits) and the price of picosecond is that of ordinary laser freckle removal. The price is several times or even ten times higher. For example, an ordinary C6 costs about 1,000 to 2,000 per second, and the average price of Honeycomb picosecond is about 10,000 to 20,000 per time.
The reason for the high price is that high-tech technology causes less damage to the skin, is highly accurate, is highly effective, does not cause scabs, does not turn black, and can ultimately remove some pigments that cannot be eradicated by traditional instruments, such as chloasma, nevus of Ohta, and redness. Yellow-green tattoos, brown-blue nevus... If traditional laser can break the pigment into gravel, then picoseconds can break the pigment into fine sand, so it can be swallowed up by our macrophages faster to achieve color removal. Shen is efficient and does not return to black.
2. Thermal damage is low (that is, it does not harm normal skin). How can picoseconds be more effective and the pigments be broken down more finely? Let’s start with the analysis of picoseconds. Picoseconds themselves are actually units of time. Everyone knows that 1 minute is equal to 60 seconds. 1 second = 100 milliseconds. 1 second = 1000*1000 microseconds. 1 second = 1000*1000*1000 nanoseconds (commonly used This is the freckle removal laser) 1 second = 1000*1000*1000*1000 picoseconds and this is an ultra-short pulse, which means that the energy of the laser is released instantly in a shorter time, and the pigment cells are naturally hit thinner! More broken! It is also easier to achieve phagocytosis and transport by macrophages, achieving the effect of lightening pigmentation. When used in laser skin beautification, that is to say, the shorter the pulse, the more precise the application to the pigmented area, and the less likely it is to affect the normal skin area next to it, the less likely it is to develop scabs, and the safer it is! The feeling of doing Honeycomb Picosecond 
After the doctor explained the professional common sense, the machine started to prepare for operation after preheating. First remove your makeup, then put on goggles. The doctor will choose the appropriate energy to operate based on your skin problems and condition.
It was my first time to do this project. I didn’t know how painful it would be, so I was a little nervous. The doctor was very gentle and suggested to try the energy on the sensitive areas of the cheeks first. I think I can accept it and then start the first round of operations. The first time is a full face treatment. The laser hits the face and there is a burning feeling. It is similar to my previous experience of laser hair removal. It is hot and stinging instantly, but it is completely tolerable. Compared with various existing laser beauty programs, The comfort level of Honeycomb Picosecond is quite high. I did not apply anesthesia and the pain was acceptable because the operation speed was very fast. The whole process was basically over in less than ten minutes for the first time. After asking about tolerance, we quickly started the second round of honeycomb lens treatment on key areas ~ such as acne marks, red bloodshot areas, darkened areas on the nose, and cheeks. The pain at this stage will be slightly more obvious than the first stage, but it is still bearable, but the heat will be slightly stronger, and the entire face will feel hot.
During the treatment process, the doctor will always explain the operation site and ask about tolerance. My treatment was almost smooth. Regardless of any laser, the amount and level of energy used need to be considered by the doctor in many aspects. For example, you need to determine whether your spots are epidermal or dermal, what your skin barrier is, etc., etc., are all key to the treatment effect. Therefore, when choosing hospitals and institutions for picosecond projects, please take the doctor’s experience and ability as one of the price references. Even if the same machine is used by different doctors, the final effect and safety of the operation will be different. After treatment, you need to apply a hydrating mask to replenish moisture and cool down the skin. It does not affect your daily skin care and life at all, just be sure to pay attention to hydration and sun protection.